MSC-D

Multi-signal and multi-function portable smart calibrator with display

MSC (Multifunction Smart Calibrator) is a flexible and universal instrument for the maintenance and testing of process sensors and meters. With an accuracy class of better than 0.05% for each type of input/output, MSC offers measurement and signal generation: analog, digital, temperature sensor and load cell. This powerful calibrator offers advanced features such as automatic ramp generation (single or loop) and data logging with instant data sharing/exporting or an entire log session in .CSV format.

Equipped with a rechargeable lithium-polymer battery, MSC is able to power external devices or sensors and can be used without continuous power supply with the autonomy of up to 20 hours. With a reading capacity of up to 100,000 measurements and the full support of the LabVIEW libraries, it is suitable for professional and industrial use by PLC programmers, maintenance technicians, technical assistance companies, measurement laboratories, device control and calibration activities, electronics laboratories, electromechanical workshops, and quality control activities.

The device is supplied with a calibration report useful to verify its metrological characteristics and to validate the correctness and accuracy of the measured/generated signal during calibration sessions.
Parameter configuration and data management can be done from a Windows desktop application (via micro USB cable) or mobile app (for iOS and Android devices via Bluetooth connection).

Request a quote now, contact our sales offices or click here.

TECHNICAL DATA

Battery power supply	Lithium Polymer (LiPo) battery 3.400 mAh
Lifetime	Lifetime 8 hours (min@max load), 20 hours (max)
AC Power supply	230 Vac with standard USB battery charger
Status LEDs	power supply error datalogger on battery status
Insulation	Battery-powered instrument, intrinsically isolated
Overvoltage protection	230 Vac max without permanent damages (TBC)
Rejection	50/60 Hz
Sampling rate	10 Hz
Operating modes	Signal measurement Signal generation (with ramps) Data logging
Buzzer	for overload reporting an inability to simulate the requested value
Standard bushings	Nr. 4 test leads 4mm
Thermocouple connection	Mini plug (7,9 mm) for TC signal measurement or generation
MicroUSB functions	power supply FW upgrade ModBUS communication (virtual COM)
Ethernet communication	Nr. 1 100Mbit Ethernet port
Operating temperature	-20..50°C (without charging), 0-45°C during charge
Error display	Overvoltage (V > 28 V) Under voltage (V < -0,2 V) Over-current (I > 24 mA) Under current (I < -0,1 mA) Resistance < 18 Ohm Resistance > 400 Ohm Load cell fail supply Blink value (voltage/current/resistance/bridge generation failure)
Humidity	30..90 % non condensing
Dimension (WxHxD)	88 x 147 x 25 mm
Weight	330 g
Protection degree	IP20
Equipment	Connection cables (4), micro USB/USB cable, battery charger
Calibration certificate	On-demand
Standard	CE
Norms	EN61326-1; EN61010-1
SIGNAL MEASUREMENT
Current	0..24 mA active & passive; protection ± 28 V
Voltage (V)	0,0÷27 V
Voltage	-10mV÷+90mV
Thermocouple	Type J,K ,T, E, N, R, S, B, L
Thermoresistors (2,3,4 wires)	Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120
Load cell	350 Ohm; -0,2÷+2,4mV/V
Pulse	max count 1.000 Hz
Frequency signal	0,1..1.000 Hz
Accuracy	0,03%; 0,04% for current
Resolution	1 µA; 1 mV; 5 µV; 0,1°C; 0,1uV/V
SIGNAL GENERATION
Current	0,1..24 mA active & passive; protection ± 28 V
Voltage (V)	0,1÷24 V
Voltage (mV)	-10mV÷+90mV
Thermocouple	Tipo J,K ,T, E, N, R,S, B, L
Thermoresistors (2 wires)	Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120
Load cell	350 Ohm; -0,2..+2,4mV/V
Pulse	min 0,5 ms (1..24V) pulses number settable
Frequency signal	0,1..1.000 Hz
Accuracy	0,03%; 0,04% for current
Resolution	1 µA; 1 mV; 5µV; 0,1°C; 0,02 Ohm; 0,1 uV/V;
RAMP FUNCTIONS
Signals	Current/Voltage/TC/RTD/Load cell
Functions	single or in the Loop
Type	MAX 9 segments, ramp resolution 100 ms, minimum ramp 1 second
DATA LOGGING
Datalogger	Yes
Sampling rate	>500 ms