TECHNICAL DATA
Power supply from mains | From 100-240 VAC mains via standard Micro USB battery charger |
Battery power supply | 1 Lithium Polymer (LiPo) 3400 mAh battery |
Switching on | By button or automatic (depending on mains power supply) |
Autonomy | 4 hours (minimum at maximum load) |
Degree of protection | IP20 |
Overvoltage protection | 240 Vac max without permanent damage |
Operating temperature | -20..50°C (not charging), 0..40°C during charging |
Long-term storage temperature | 0..35°C |
Humidity | 30..90 % non-condensing |
Dimensions (wxhxd) | 96 x 171 x 44 mm |
Weight | 395 g |
Rejection | 50/60 Hz |
Sampling Frequency | 10 Hz |
Operating Modes | Meter, Generator, Datalogger, Ramps |
Memory | 16MB Flash, 8 MB RAM |
Display | 5-point capacitive touch display, TFT-LCD 262k colors, 3.5“, 53x71mm, 320x480 resolution, with backlight. |
Management systems | Touch display interface and WebServer with integrated multilingual APP (Italian, English, German, French, Spanish) |
Weight | 395 g |
Supplied with | (1) Portable case, (2) MSC-D with battery, (3) adapter, (4) USB charging cable, (5) factory calibration report, (6) test cables |
Calibration report | On request |
Certification | CE |
Standards | EN61326-1; EN61010-1 |
MEASUREMENT ACCURACY | |
Accuracy | 0.03% basic, 0.04% for current |
Resolution | 1 µA; 1 mV; 5 µV; 0.1°C; 0.1uV/V |
GENERATION ACCURACY | |
Accuracy | 0.03% basic, 0.04% for current |
Resolution | 1 µA; 1 mV; 5µV; 0.1°C; 0.02 Ohm; 0.1 uV/V; |
INTERFACES AND SIGNALS | |
Buttons | On / Off |
LED | Power on LED Battery charge status LED Datalogger on LED |
Buzzer | Buzzer to signal overload and when it is impossible to simulate the requested value. |
Standard bushings | No. 4 4mm bushings |
Thermocouple connection | Mini plug (7.9mm) for thermocouple measurement and simulation |
COMMUNICATION | |
Micro USB | For firmware updates |
Wireless | Integrated 2.4 GHz WiFi (802.11 b/g/n, up to 150 Mbps); Access Point/Station mode |
Ethernet | 1 Fast Ethernet 100 Tx port, ModBUS TCP-IP protocol; max 8 TCP-IP clients, control web server |
MEASURING FUNCTIONS | |
Current | 0.1..24 mA active and passive; protection ± 28 V |
Voltage (V) | 0..26 V |
Voltage (mV) | -10mV..+90mV |
Thermocouple | Type J,K ,T, E, N, R, S, B, L |
Thermocouples (2,3,4 wires) | Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120 |
Load cell | 350 Ohm; -0.2..+3mV/V |
Pulse | Max. count 1000 Hz |
Frequency | 0.1..1000 Hz |
GENERATION FUNCTIONS | |
Current | 0.1..24 mA active and passive; protection ± 28 V |
Voltage (V) | 0.1..26 V |
Voltage (mV) | -10mV..+90mV |
Thermocouple | Type J,K ,T, E, N, R,S, B, L |
Thermoresistances (2 wires) | Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120 |
Load cell | 350 Ohm; -0.2..+3mV/V |
Pulse | Min 0.5 ms (1..24V) number of pulses can be set |
Frequency | 0.1..1000 Hz; resolution 50µs |
DATA LOGGER | |
Data logger | Yes |
Sampling time | >500 ms |
RAMP FUNCTION | |
Signal | Current/Voltage/TC/RTD/Load cell |
Functions | Single or Loop |
Type | Maximum 9 segments, ramp resolution 100ms, minimum ramp 1 second |
SETTINGS AND SIGNALS | |
Functions menu | General setup (select type of operation, type of signal, language, mains frequency 50/60Hz, std or expert mode) Measurement (select voltage / current / passive current / thermocouples / resistance thermometers / bridge / pulses) Datalogger (start/stop/pause) and data visualization Generation (selection of voltage / current / passive current / thermocouples / thermoresistances / bridge / pulses) Generation of signals in ramp mode or with presets (10 for each mode) |
Error messages | Overvoltage Voltage reading higher than 28 V Under voltage Voltage reading lower than -0.2 V Over current Current reading higher than 24 mA Under current Current reading lower than -0.1 mA Resistance lower than 18 Ohm Resistance higher than 400 Ohm Load cell not powered correctly Value flashing Voltage/current/resistance/bridge generation unsuccessful |
Manuales, flyer
Certificados
Accesorios
Productos alternativos
Versiones del producto
Aaccesorios
USB cable plug USB-A - MicroUSB-B - 5P ( KIT - USB , MY2 , Z109REGBP )
Disponibilidad para confirmar, contáctenos ?