Images/schemes proposed are to be considered as indicative and non-binding

R-KEY-LT EtherNet/IP (HW rev. E0)

1-port EtherNet/IP -> ModBUS RTU/ASCII/TCP-IP gateway & protocol converter

SENECA offers three Ethernet/IP gateway variants that differ in form factor and number of Ethernet ports. The R-KEY-LT Ethernet/IP model is designed to simplify network communications between Modbus RTU/ASCII/TCP devices and EtherNet/IP networks. This gateway takes on the main function of acting as a Modbus master to acquire and exchange data with EtherNet/IP devices. Concretely, the R-KEY-LT converts Modbus data into EtherNet/IP packets, enabling an EtherNet/IP scanner to control or monitor Modbus devices. In detail, the Ethernet/IP gateway works as ModBUS Master devices on the serial side and Ethernet/IP adapters on the Ethernet side. Modbus requests, such as read or write commands, are configured directly on the devices, automatically generating an EDS file. Once this file is imported into the PLC development software, e.g. Rockwell STUDIO 5000, all configured I/O will be accessible without further configuration. In addition, up to 3 Modbus TCP-IP servers can be connected in addition to the serial devices.

135,00 €

: 128,25 €

TECHNICAL DATA

Power supply	10..40 Vdc; 19..28 Vac
Absorption	Max 1 W
LED Status Indicators	Power supply Rx / Tx RS232 / RS485 IP powered/assigned Transmission / Ethernet connection Ethernet/IP communication
Isolation	1.5 kVac
Grade of Protection	IP20
Operating temperature	-25..+65°C
Connections	Screw terminals, 7-way removable screw, 5mm pitch Screw terminals, 2-way removable screw, 5mm pitch RJJ45 connector
Ethernet Ports	Nr.1 Fast Ethernet 100 Tx port, RJ45
Serial Ports	Nr.1 RS232 / RS485 switchable port, max 115k baud rate on connector
Protocols Supported	ModBUS RTU, ModBUS TCP-IP, ModBUS ASCII
Mode of operation	ModBUS RTU/TCP-IP/ASCII -> Ethernet/IP Gateway
Dedicated memory for commands	512 Bytes R/W
Max client TCP-IP (Server Mode)	3
Max ModBUS RTU/ASCII slave nodes	128
Dimensions (WxHxD)	53 x 90 x 32 mm
Weight	80 g
Case	PC/ABS self-extinguishing UL94-V0
Installation	For DIN Rail (IEC EN 60715)
Certifications	CE, UKCA, UL
CONFIGURATION
DIP Switch	Flash memory, IP address, serial activation
Web Server	Ethernet/IP parameters, ModBUS registers, firmware update, serial traffic, I/O mapping, EDS export
Configuration file	EDS
SDD (Seneca Discovery Device)	x