TECHNICAL DATA
Power supply | 10..40 Vdc; 19..28 Vac |
Absorption | Max 1 W |
LED Status Indicators | Power supply Rx / Tx RS232 / RS485 IP powered/assigned Transmission / Ethernet connection Ethernet/IP communication |
Isolation | 1.5 kVac |
Grade of Protection | IP20 |
Operating temperature | -25..+65°C |
Connections | Screw terminals, 7-way removable screw, 5mm pitch Screw terminals, 2-way removable screw, 5mm pitch RJJ45 connector |
Ethernet Ports | Nr.1 Fast Ethernet 100 Tx port, RJ45 |
Serial Ports | Nr.1 RS232 / RS485 switchable port, max 115k baud rate on connector |
Protocols Supported | ModBUS RTU, ModBUS TCP-IP, ModBUS ASCII |
Mode of operation | ModBUS RTU/TCP-IP/ASCII -> Ethernet/IP Gateway |
Dedicated memory for commands | 512 Bytes R/W |
Max client TCP-IP (Server Mode) | 3 |
Max ModBUS RTU/ASCII slave nodes | 128 |
Dimensions (WxHxD) | 53 x 90 x 32 mm |
Weight | 80 g |
Case | PC/ABS self-extinguishing UL94-V0 |
Installation | For DIN Rail (IEC EN 60715) |
Certifications | CE, UKCA, UL |
CONFIGURATION | |
DIP Switch | Flash memory, IP address, serial activation |
Web Server | Ethernet/IP parameters, ModBUS registers, firmware update, serial traffic, I/O mapping, EDS export |
Configuration file | EDS |
SDD (Seneca Discovery Device) | x |