RU
TECHNICAL DATA
| Power Supply | 80..265 Vac (-H versions) 10..40 Vdc/19-28 Vac (-L versions) |
| Power Transducers | Max 18 V, 25 mA |
| Max Consumption | 1,5 W |
| Insulation | 1.500 Vac |
| Noise rejection | 50..60 Hz |
| Communication interface | RS485, ModBUS RTU, max 32 nodes (optional board) |
| Memory | Data memory, 10 years EEPROM |
| Operating temperature | -10..+60°C |
| Case | PPO self-extinguish DIN 43700 |
| Front protecion degree | IP65 |
| Terminals | Removable, pitch 3,5 – 5,08 mm |
| Dimension WxHxD | 98,5x44,5x90,5 mm |
| Panel hole dimension | 96,5x48,5 mm |
| Weight | 200 g |
| Settings | Front keys, password protect access |
| Anti-bump filter | From 0 to 255 s |
| Calibration | Yes, factory setting |
| Manual Mode | Setpoint value visualization with output retransmission |
| Automatic Mode | Measured value visualization with output scaling and retransmission |
| Special functions | Manual / Automatic mode, signal generator, anti-bump filter |
| Norms | EN 61000-6-4, EN 61000-6-2, EN 61010 |
| Approvals | CE |
| Display | 4-digit LED, adjustable contrast |
| Status Indicators | 2 LEDs (Automatic / Manual) |
| Buttons | 3 control buttons |
| Accuracy | 0,1% |
| Stability | 0,01%/K |
| Linearity | <0,1% |
| EMI | <1% |
| Input channels | 1 |
| Input channels type and range / Resolution | Voltage: 0..10 V (impedance 100kΩ) Current (active/passive): 0..20mA (impedance 20Ω) Potentiometer: 1..100kΩ (with 330Ω parallel resistor, exciting current 1,1mA) 14 bit, 10.000 points |
| Sampling frequency | 2 Hz |
| Response time | 700 ms |
| Output channels | 1 |
| Output channels type and range / Resolution | Tensione: 0..10 V (min 1KΩ) Current (active/passive): 0..20 / 4..20 mA (max 500Ω) 2μA / 1mV - 10.000 points |
Product versions
Price
€ 199,00
€ 182,00
€ 235,50
S311G-4-L-O
[S311A-4-L-O] Power supply 10-40 Vdc / 19-28 Vac, 4 digit, optional board (2 SPDT relay, Modbus, reset)
?
€ 239,50
Price
€ 108,00
€ 97,00
€ 180,00
€ 62,50
€ 22,00
