Images/schemes proposed are to be considered as indicative and non-binding

T203PM100-MU

Single-phase power meter with direct current and energy measurement up to 100 A

T203PM600-MU is a single-phase AC/DC TRMS network analyzer with ModBUS interface, analog and digital output, and inputs with current measurement ranges up to 100 A and voltage 290 Vac, 1000 Vdc. The instrument performs direct measurement of current and energy without using external CTs. T203PM100-MU measures values of voltage, AC/DC current, active/reactive/apparent power, power factor, frequency, and harmonic distortion (THD), and transmits them on an analog or digital output.

The T203PM models have analysis capability up to the 21st harmonic and are equipped with a digital contact that can be used as an alarm or counter. The configuration is made through EASY SETUP 2 software and a Micro USB programming port. T203PM power meters are particularly robust as they have a wide operating temperature range, -25..+65°C, insulation up to 3 kVac (on bare conductors), and safety class CAT. III 600V (bare conductor) and 1kV (insulated conductor). The devices can be mounted on IEC EN60715 35mm DIN-rail, using wall plugs, or suspended using cable ties. In combination with devices such as Z-KEY/R-KEY gateways, they can be easily integrated into Ethernet networks and complex systems.

194,00 €

: 184,30 €

TECHNICAL DATA

Power supply	11 - 28 Vdc
Max absorption	Typical: < 70 mA @ 24 Vdc
Isolation	3 kVac (on bare wires)
Status indicators	Power supply, USB communication, digital output
Installation category/overvoltage	CAT. III 600V (bare conductor) CAT. III 1kV (insulated conductor)
Frontal protection class	IP20
Mounting	DIN 35mm IEC EN60715 rail, wall-mounted using dowels, suspended using cable ties
Connections	6-way removable screw terminals, 5 mm pitch for cables up to 2.5 mm²
	Micro USB for programming and fw upgrade
Operating temperature	-25..+65°C
Dimensions	95 x 75 x 35 mm
Weight	150 g
Case	PA6, colour black
Measuring and calculating templates
Sampling time	47,000 sps
Settling time RMS values	500..1000 ms (up to 99.5%)
MEASURED PARAMETERS
Instantaneous values	Voltage, AC/DC Current, Active / Reactive / Apparent Power, Power Factor, Frequency, THD
Average / max / min values	Voltage, AC/DC Current, Active / Reactive / Apparent Power, Power Factor, Frequency, THD
Harmonics	Up to 21th
Precision class	0,5% f.s. @ 50/60 Hz, 23°C (above 2% f.s.) 1% f.s. @ 50/60 Hz, 23°C (above 2% f.s.)
COMMUNICATION
Serial interface	N°1 RS485 port
Protocol	ModBUS RTU
Distance	Up to 1,200 m
Connectivity	Max 32 modes
Port	N°1 Micro USB programming port
METERING INPUTS
Voltage / Current	Up to 0..100 A or 0..290 Vac (AC/DC TRMS); 0..1000 Vdc TRMS DC Bipolar Crest factor: 100A = 1.7 / 300A = 1.9 / 600A = 1.9 Passband: 1.4 kHz Overload: 3 x IN continuous
BUILT-IN I/O
Channels	1DO, 1AO
Digital output	ACTIVE 0 - Vdc, max. load 50mA
Analog output	Voltage: 0..10 Vdc, minimum load 2kΩ. Reverse polarity and overvoltage protection Resolution: 13.5 f.s.AC Error for EMI: < 1 % Coeffic. Temperature: < 200 ppm/°C Hysteresis on measurement: 0.2% f.s. Response time: < 200 ms
Programming	EASY SETUP 2
Certifications/Markings	CE
Standards	EN61000-6-4, EN61000-6-2, EN61010-1