Images/schemes proposed are to be considered as indicative and non-binding

Z-4DI-2AI-2DO HW rev. D0

4 CH Digital Input/ 2 CH Analogue Input, 2 CH Digital Output, Modbus RTU

Z-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module allows the possibility to set the parameters via USB (Easy setup software) an registers repetition on Modbus RTU protocol (NR.2 independent RS485 slave ports). Baud rate for ModbusRTU is from 1.200 up to 115.200 bps. Signal configuration include 2 analog inputs (voltage or current), 4 digital inputs (NPN or PNP), 3 relay outputs, 4 counters and 4 totalizers @ 32 bits, max 7 kHz. Z-4DI-2AI-2DO has 1.500 Vac galvanic isolation between power supply and communication.

280,50 €

: 266,48 €

TECHNICAL DATA

Power supply	11.40 Vdc; 19..28 Vac
Power consumption	1,5W @ 24Vdc, Max: 4W
Isolation	1,5 kVac - 3-ways
Protection degre	IP20
Status LED indicators	Power supply Rx/Tx ModBUS Inputs / Outputs status Fail
Connections	Removable screw terminals for conductors up to 2.5 mm2 IDC10 connector for DIN rail 46277 Micro USB on the side RJ45
Programming	DIP Switch (default settings reset) Web Server EASY SETUP
Serial ports	Nr.1 RS232/RS485 Nr.1 RS485
Speed	Up to 115.200 bps
Supported protocols	ModBUS RTU
USB port	Nr.1 micro USB on the side
Digital inputs	Nr.4
Type of digital inputs	PNP / NPN; Voltage input OFF < 4V, ON > 8V (max. 24 Vdc) Max frequency 5 kHz Power consumption 3mA @ 12Vdc, 10mA @ 24Vdc
Digital input counters	Nr.4 resettable counters @32 bit max 5 kHz
Analog inputs	Nr.2
Type of analog inputs	0-20 mA / 0-30 V Resolution up to 16 bit Protection 40V / 25mA
Digital outputs	Nr.2
type of digital outputs	relays NA / NC SPDT, max 250Vac - 2A
Mounting	DIN rail guide 35 mm DIN 46277
Operating temperature	-25..+70°C
Storage temperature	-30..+85°C
Humidity	30..90% non-condensing
Dimension	35x102.5x111 mm
Weight	about 110 g
Housing	PA6, black color
Standard	CE